Shop

  • Process and Heavy Duty Cranes

    0 out of 5
    • Incorporates many of the features of the double girder cranes with extended duty cycles.
    • High levels of loading special applications in the metal working, power station and container handling industries.
    • Customized electronic, electrical and mechanical controls.
    • Open drum design provides true vertical lift.
    • A separate gearbox, brake and motor allow for ease of maintenance.

     

     

  • Single Girder Cranes

    0 out of 5

    At a glance

    • SWL up to 16 t.
    • Spans up to 39 m (SWL dependent).
    • Optimised headroom via main girder connection variants.
    • Highest possible hook position can be achieved.
  • Double Girder Cranes

    0 out of 5

    At a glance

    • SWL up to 120 t.
    • Spans up to 40 m (as a standard).
    • Additional features can be easily added.
    • Fast long and cross travel speeds possible.
  • Underslung Cranes

    0 out of 5

    At a glance

    • SWL up to 8 t.
    • Spans up to 25m (SWL dependent).
    • Crane track suspended from ceiling.
    • Ideal for low buildings and complex building conditions.
    • Optimal side approach dimensions maximise available building width.
  • Portal Cranes

    0 out of 5
    • Available in double and single girder.
    • Used for  indoor  or outdoor applications for loading Stock Yards where the costs of the gantry would be prohibitive.
    • Can incorporate several Hoists.
    • Increases the stacking efficiency.
    • Cantilevers  allow access to areas outside of the crane rails
  • Semi – Portal Cranes

    0 out of 5
    • SWL up to 10 t
    • Spans up to 15 m.
    • Used mid-level within production environments.
    • No floor-level obstacles as no guide rail required.
    • Installation quick and easy.
    • Minor loading of building structure
  • Jib Cranes

    0 out of 5

    At a glance

    • SWL from 0.5 to 6.3
    • Jib length up to 10 m.
    • Slewing range 0 – 360°
    • Up to 4 ton with electric chain hoist.
    • Up to 6.3 ton with electric wire rope hoist
  • HB Systems

    0 out of 5
    • Range from straight forward HB systems to high load capacity with long crane spans
    • Low headroom to wide suspension spacing
    • Very light and ideal for lightweight buildings
    • Optional electric hoist travel
    • Optional mobile control
    • Option for manual or electric travel
  • Lightweight Mobile Gantry

    0 out of 5

    At a glance

    • Load capacity (SWL) up to 2000 kg
    • Total height up to 5000 mm
    • Total width in accordance with load capacity (SWL):

    Load capacity (SWL)    max. total width

    250kg                             7900mm
    500kg                             7000mm
    800kg                             6500mm
    1000kg                           6300mm
    1250kg                           5650mm
    1600kg                           5000mm
    2000kg                           4000mm

  • ABUS Wire Rope Hoist

    0 out of 5

    The SWL range of ABUS electric wire rope hoists extends from 1 t to 120 t. A wide range of models depending on application and requirements are available – starting with the standard wire rope hoist in the lower SWL range up to special crab unit designs incorporating additional features at the higher SWL range.

    However, all wire rope hoists have these characteristics in common: the highest levels of up-time availability, and safety within materials handling operations.

  • ABUS Electric Chain Hoist

    0 out of 5

    Chain hoists in daily use at workstations have to be robust, reliable and low-maintenance.
    The ABUCompact range of ABUS electric chain hoists offer solutions for up to 4 t SWL featuring the high build quality for which ABUS is well-known.
    The modular design allows a huge range of lifting speeds of up to 20 m/min for hook paths of up to 50 m.

    Precision lifting, safety slipping clutch and quick plug-type connectors are as integral a part of the standard configuration as is the tried and tested durable direct control for sizes GM2, GM4 & GM6.

  • DSL Systems

    0 out of 5
  • Lifting Tackle

    0 out of 5

    • Chain Slings ranging from 1 leg – 4 leg with any length, adj, and various hooks

    • Endless Round Webbing Sling ranging from 1 – 150 ton , 0.5 – 10 m (and more)

    • Flat Webbing Sling ranging from 1 – 10 ton , 0.5 – 10 m (and more)

    • Steel Wire Rope Sling ranging from 6mm – 56mm with any length

    • Chain Blocks ranging from 500kg – 40ton , standard 3m lift

    • Lever Blocks ranging from 750kg – 9ton , standard 3m lift

    • Bow/ D-shackles ranging from 0.5ton – 150 ton

    • Eyebolts/ Eyenuts ranging from M6 – M76

    • BSW Eyebolts ranging from 3/8” to 2 1/2”

    • Safety Harness’s 25kn

    • Safety Latches for Slings ranging from 7 – 32mm

    • Geared/ Plain Crawl ranging from 500kg – 20ton , standard 3m lift (geared only)

    • Vertical Plate Grab ranging from 1ton – 8ton

    • Horizontal Plate Grab ranging from 1ton – 10ton

    • Universal Plate Grab ranging from 1ton – 8ton

    • Lifting Magnet ranging from 100kg – 3ton

    • Zero Level Lift Table 1.5 – 2 ton

    • Electric Lift Table 3ton

    • Pallet Jack 3 – 5 ton

    • Hydraulic Trolley Jack 3 – 5 ton

    • Bottle Jack 2 – 5ton

  • Morris Electric Chain Hoist

    0 out of 5
    • The “Morris” Chain hoist offers a range of lifting capacity from 500kg – 25 tons. These are made for heavy duty application.
    • FEC80 ultra heat-treated alloy steel chain which is suitable for rain,
      sea water and chemical environments.
    • Low overall headroom and weight with minimal pulling effort in compact design.
    • Hooks are all forged alloy steel with wide throat opening and slip resistant safety hook to better retain sling.
    • Manufactured to BS3243/1990.
    • Standard voltage is 380V with  options available  for 525V / 3 phase as well as 220 V single phase.
    • Explosion proof chain hoist available class Ex d IIB T4 GB. Suitable for the temperature of IB T4, Zone 1 or 2. Allowed temperature around hoist 135 degrees.
  • Morris Radio Push Button Remote

    0 out of 5
    • Applications: Industrial cranes and machinery.
    • 10 dual speed push buttons plus rotary selector switch / emergency stop switch.
    • LED for indication of operating / battery status.
    • ILOG for the quick activation of a spare transmitter.
    • 2 rechargeable NiMH exchange batteries, approx. 30 hours of continuous operating time.
    • Robust plastic housing, protection class IP 65.
    • Weight, 500g including battery and rubber shock absorber.
    • Manual frequency selector switch.
    • Further options: Automatic frequency selection , catch release, tandem operation, infrakey, shock off/ zero –g / inclination switch, pre selection of trolley / hoist , feedback via LED , customised labelling , approvals for potentially explosive atmospheres (Ex Zones underground / 1/2/21/22 according to ATEX and IECEx
    • Push button transmitter, video display
    • (Ex Zones underground / 1/2/21/22 according to ATEX and IECEx.)

     

  • Morris Radio Joystick Remote

    0 out of 5
    • Applications: Diverse cranes, lift equipment and machinery.
    • Up to 2 joy stick’s / up to 6 one – step push buttons/ up to 2 toggle or rotary switches/ emergency stop switch.
    • ILOG for the quick activation of a spare transmitter.
    • 2 rechargeable NiMH exchange batteries , approx. 20 h of continuous operating time
    • Robust plastic housing, protection class IP 65.
    • Weight approx. 1.5Kg including battery.
    • Automatic frequency selection for construction crane and mobile hydraulic versions.
    • Manual frequency selector switch
    • Further options: Feedback, infrakey, shock off / zero –g / inclination switch, catch and release , tandem operation, enabling switch, cable control.
    • Push button transmitter, video display.